I've started working on the axe now/ you can see the basic pieces gathered. I have a chloroplast shell ready as well as 3 plastic rollers that the chain blade will run over. you can also see what is going to be the drive wheel (2 bottle tops, covered in the plastic spikes from the neck of the bottles), I am planning to use the nylon strapping as the base of the chain and the broken ice scraper pole will be the handle for my axe.
Well I finished the belt and teeth for my axe.
the belt is simple nylon straping, and the teeth are foam cushion. I cut a strip of the black foam and then cut that into right angled teeth. I then used clear nylon thread to sew the teeth to the strap. to add some grip and clean up the threads I applied hot glue to the underside of the strapping and used a duct tape covered finger to spread the hot glue across that layer.
I've got the Axe halfway done.
I built up the axe and the motor sticks out to far. I'm planning on using pva foam and some decorative skulls to make the motor look better.
view the moving chain
Photography - Fursuit/Sculpture/Jewelry/etc
4 years, 11 months ago
04 Sep 2013 04:49 CEST
Full Size: 77b65ae7614cb0af3663a84b9d01cd58