Something else I made for our winter coop
But I thought they were pretty cool
these gravity feeders are to save us space inside.
Its a simple enough design, lengths of 3 inch wide pvc pipe connected to 2 different connections to give us that nice open bottom. I uses a 90 degree and a 45 degree bend in that order to make it work best. I then screwwed it onto the a piece of cut to size plywood with metal strapping.
Though you don't see it here I make a set of brackets on the back that let me hang it from the inside lip of the window and a set of rubber feet in the bottom corners of the plywood. this way its up off the floor in the coop for cleaning and while its affixed to the wall I can slide it back and forth along that window. I'm gonna get some covers for the tops cause they like to look out that window and this way they wont poop in there food
Details
Published:
11 years, 8 months ago
29 Sep 2014 03:14 CEST
Initial: fda770eb461e7b16d5818904e2b52645
Full Size: 140855ff6f2e9a87b9509f3b7a462ca8
Large: 6fcc2eea3d7200cbcfc61c174d264ce0
Small: 693d1a7369f5db6731d19fe707f470e9
Stats
51 views
0 favorites
4 comments
