Welcome to Inkbunny...
Allowed ratings
To view member-only content, create an account. ( Hide )
Little Tails 10 - Page 01
« older newer »
bbmbbf
bbmbbf's Gallery (1987)

Bowsette - Free 3d printable model

Cute Together 1

Medium (920px wide max)
Wide - use max window width - scroll to see page ⇅
Fit all of image in window
set default image size: small | medium | wide
Download (new tab)
page 1
page 2
page 3
page 4
by bbmbbf
Mrs. Brisby (Figure Concept)
+4
PRE-ORDER – Rouge in Lingerie (6.5″ figure)
+9
Bowsette Free 3d printable ready model here :
https://furrysculptures.com/producto/bowsette-free-3d-p...

Keywords
female 567,588, human 52,070, digital 15,147, 3d 8,738, mario 1,824, model 1,646, figure 1,645, 3d model 855, statue 637, bowsette 258, 3d print 104, 3d-model 6, printable 6
Details
Type: Picture/Pinup
Published: 8 months, 3 weeks ago
Rating: General

MD5 Hash for Page 1... Show Find Identical Posts [?]
Stats
977 views
119 favorites
15 comments

BBCode Tags Show [?]
 
FairyGardens
8 months, 3 weeks ago
Cute and awesome! :D
JasmineRobotnik
8 months, 3 weeks ago
If I only had a 3d printer Ahh!!!

But seriously this is beautiful. Thank you for giving this for free!
alphawolf14
8 months, 3 weeks ago
Ya te estabas tardando xd
rnixon
8 months, 3 weeks ago
I'll grab this and give it a try - my printer isn't the smoothest, but it's worth a shot!
bbmbbf
8 months, 3 weeks ago
an advice.. do not print it in the position that appears.    for example the head should be printed upside down, so there will not supports on the hair or face... position is always important,  try to put the pointy parts pointing up always..  like the fingers :)
rnixon
8 months, 3 weeks ago
Yeah, I set the arms so the fingers are up and shouldn't need supports, and I tried to minimize supports in general. Though I couldn't really find a good angle for the ponytail, so I'll have to see how that comes out.

I'm printing each part individually, so if one doesn't come out I can adjust it and try again, rather than 'print everything that fits on the plate'.  Partly because the way my luck has been running, I get 40 hours into a 60 hour high-res print and my power goes out.

I'm using a Monoprice Maker Select Plus. It's reliable and remarkably low on 'pain in the neck adjustments' but it's not fast.
bbmbbf
8 months, 2 weeks ago
Yep.. nowdays I print most parts individually too.. the hands tho I printed both at the same time

the pony tail, like the head, upside down.. there's inevitable supports on the tips that are curved, but are less in general than in other position
bbmbbf
8 months, 2 weeks ago
the Monoprice Maker Select Plus looks like a prusa 3 clone.. a good budget price printer...

another advice.. after printing, you must use sandpaper to reduce the thickness of the pegs to make fit the parts ^^
specially on the head parts (horns and ponytail)
rnixon
8 months, 2 weeks ago
I'm having some sort of really bizarre problem with these prints. I think I must have had something set wrong in Cura when I sliced the parts. I'm going to have to recheck my settings and try again when I have some time later this week.
bbmbbf
8 months, 2 weeks ago
I have not much experience with cura since I use the zortrax propietary software for the slycing, but if I can help, let me know ^^
rnixon
8 months, 2 weeks ago
I did some testing and appeared to be having a slight underfeed problem with the printer, which I've fixed, but that wouldn't explain all the issues I had. Before I make another go at it, I wanted to ask, what infill percentage do you use?
bbmbbf
8 months, 2 weeks ago
most of the time.. just 10%
BadgerKitty
8 months, 3 weeks ago
Thank you so much for releasing this! A few of my friends have become mad Bowsette fans, so I may have to print this for a couple of them! It looks really great!
sonictopfan
8 months, 3 weeks ago
Nintendo better make this real, they'll be selling Amiibos like crazy... well... not for me but still :p
SentinelX
8 months, 3 weeks ago
Well that was fast
New Comment:
Move reply box to top
Log in or create an account to comment.